What Temperature Should Hot Water Be At The Tap Australia
Posted on by
What Temperature Should Hot Water Be At The Tap Australia. What Temperature Should Hot Water Be In Australia? Hot water temperature at the tap (bath sink, tub, shower) must be 55°C or less. What is presented below is therefore a careful amalgamation of all of those state and local hot water tap temperature requirements, to give you a great summary of the recommended hot water temperature Australia wide: Hot water temperature regulations in Australia
What temperature should hot water be at the tap in Australia? Eden Emerald Hot Water from eehotwater.com.au
A thermostatically controlled tap or a tempering valve should be installed to make sure the water comes out of the tap at a lower temperature because the delivery temperature of heated water must not be higher than 50°C Australia hot water anti-scald Codes & Regulations
What temperature should hot water be at the tap in Australia? Eden Emerald Hot Water
In Australia, the recommended hot water temperature at the tap is 50°C for bathrooms to prevent scalding, while the storage temperature should be at least 60°C to prevent Legionella bacteria growth If tap water is not at the standard hot water temperature it is a safety hazard A thermostatically controlled tap or a tempering valve should be installed to make sure the water comes out of the tap at a lower temperature because the delivery temperature of heated water must not be higher than 50°C
What Temperature Should Hot Water Be In Australia?. Learn what temperature hot water should be at the tap in Australia here Hot water needs to be stored above 60°C in hot water systems to prevent bacteria growth (such as Legionella), but a tempering valve ensures that the water comes out of the tap at a lower temperature
EHSQL(Environment,Health,Safety , Quality & Laboratory) Technical services Drinking Hot Water. Smith hot water heaters come preset for 120 degrees Fahrenheit, and this temperature should suit most consumers However, devices such as tempering valves are then installed to reduce the temperature at the tap to safe levels